With the ashtray open up there space two 7 mm top screws. One each side, that need to be removed.

You are watching: 1993 ford ranger headlight switch replacement

*

*

I left the dash trim panel resting on the steering pillar to support the weight of the radio. I had enough room to access the 7 mm screws that hold then headlight move in place.

*

*

On the remaining wires I removed them one in ~ a time indigenous the old connector and installed them into the brand-new connector.

*

One of the splice connections.

*

After perfect the wiring job-related I covering the harness back up with electric tape. To purchase the connector that I used in this repair you re welcome click here.

*

To change the headlight move the unit needs to be disassembled.

*

Then press in the spring loaded button with your ignorance as i did in the following picture.

*

Unscrew the bezel nut and separate the switch from the mounting plate. Turning back to install.

See more: Trim A Home Christmas Tree Instructions, Trim A Home 6

*

I choose to usage Motorcraft switches for Ford products as plenty of of the offshore replacements simply will not organize up. Simply my experience.