Depending on how comfortable you are under the hood of her Dodge, friend can conveniently replace your IAC valve in much less than 20 minutes. Even if you"re an ext novice 보다 natural, replacing your IAC valve is a reasonably straightforward DIY project.

You are watching: 1996 dodge ram 1500 idle air control valve


This article applies to the 2nd Generation Dodge ram (1994-2001).

The IAC valve in your Dodge ram monitors and also regulates exactly how much wait enters your engine when you idle. Your car can stall if her IAC is can not to keep the appropriate amount of wait flowing right into your engine. If your Dodge Ram begins stalling each time friend idle, climate it"s most likely time to change your IAC valve. Part Dodge lamb owners recommend cleaning her IAC valve and also seeing if that resolves the problem prior to replacing it. But since you"ll still need to remove the IAC valve come clean it and also the price of a brand-new one is not that high, you may too replace that to assist improve your vehicle"s performance.

*

Materials NeededNew IAC valveSocket wrenchLong driver wrenchPliersFlashlight (optional)

Step 1 – Prepare to replace your IAC valve

Leave your auto parked for at least an hour prior to replacing her IAC valve. When the hood is cool come the touch, open it and lock it in place with the hood prop.

Step 2 – situate the IAC valve

Look for the IAC valve, which girlfriend will uncover on the accelerator body. The IAC valve is cylindrical, and also there is an electric connector coming out of it.

*
Figure 1. Identify and locate the IAC valve.

Step 3 – remove the electrical connector

Pull the electrical connector turn off of the IAC valve and set it aside. Be careful not to damage it, together you’ll reconnect it come the brand-new IAC valve. As soon as you’ve eliminated the electrical connector, you must see two screws stop the IAC in place.

*
Figure 2. Find the electric connector.
*
Figure 3. Tenderness pull electric connector out. You"ll replace it ~ you download your brand-new IAC valve.

Step 4 – eliminate the 2 screws

Since friend will have to work around the fuel bridge, usage a long driver socket and also pair that pliers to remove the an initial screw. If the fuel bridge is not in the way, then you deserve to simply use a driver socket. V the flex drive over the bridge, you quickly can access and eliminate the 2nd screw hold the IAC in place.

*
Figure 4. Use a long driver and also pliers to access and remove the first screw stop the IAC valve in place.
*
Figure 5. Usage socket wrench to remove second screw holding IAC valve in place.

Step 5 – eliminate the IAC valve

Pull the IAC valve directly off the the throttle body.

*
Figure 6. V screws removed, you have the right to easily access the IAC valve and also remove it.

See more: How Much Is Jerry Stackhouse Worth, Jerry Stackhouse Net Worth

*
Figure 7. The IAC valve removed.

Step 6 – replace the IAC valve

Install your IAC valve by reversing the actions you take it to eliminate the old IAC valve:

Insert brand-new IAC valve. Be sure to align the holes on the valve through the screw holes. Depending on how much light friend have, you might need to use a flashlight to see and also confirm the you’ve aligned the holes.Insert each screw, and also then usage your socket wrench to tighten both.Reconnect the electric connector.Finally, close the hood.

Featured Video: just how to Clean IAC Valve in evade Ram