Your Honda CR-V‘s brake irradiate indicator is over there to let you understand that over there is an worry with the brake system. It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light shows that over there is a difficulty with the physical braking mechanism itself.
You are watching: 1999 honda crv brake light stays on
If friend are reading this write-up trying to number out whether you need to drive your vehicle, check the emergency brake first. If it’s engaged, the brake irradiate will remain lit. If the manage isn’t every one of the way down, it’ll reason the brake warning irradiate to remain on. Check to make certain that there isn’t the small bit left the it demands to turn the brake irradiate off.
Now if the emergency brake didn’t fix the situation, it’s time come look into what is resulting in your CR-V’s brake warning irradiate to continue to be on. The brake light is possibly the most essential warning irradiate of all. We execute not introduce driving v this irradiate on at all. Doing so may result in injury once the brakes fail.
Honda CR-V Brake Warning light Causes
The brake warning light suggests that her CR-V has detected that one of its major brake components has failed, commonly detected through a lose of pressure. You’ll feel a loss of press that manifests chin in the kind of a “mushy” brake pedal.
If the brake light is only coming on when you push the brakes, that’s a definite indication the the push in the brake mechanism is also low. Either the brakes require bled, or there is a leak.
Brake fluid Leak
Since you’ve currently checked the emergency brake handle, currently it’s time to examine the grasp cylinder and see if the brake fluid is low or not. Now if it is low, however not empty, adding an ext may carry out a short-term fix.
If the brake fluid looks like it is all the means out, you’ll require to add more, bleed the brakes, and also ideally settle the difficulty so the you aren’t repeating all of this again. If the brake liquid is leaking the end over the brake pads and shoes, it way poor brake performance.
Just remember, it had actually to leak the end somewhere, and also that adding fluid without fixing the difficulty is just a short-term solution. The leak can gain worse over time and lead come brake failure.
Pressure Differential Switch
Your brake system is separated into 2 circuits. These circuits reduced the brake system in two. That way, if the brake mechanism gets a leak or fails, girlfriend still have actually brakes on half of her CR-V’s wheels.
The pressure differential switch actions the distinction in pressure between the 2 circuits and will report the there is a difference by transforming on your CR-V’s brake warning light. In many vehicles this switch is situated in the grasp cylinder. You’ll watch a harness plugin somewhere around there.
Check the Brake Lights
Some vehicles will now activate the brake warning light on the dash if the yes, really brake lights behind it walk bad. Inspect to see that both of them are lighting up. If not, try replacing the bulb and also see if the solves the problem.
How to rotate off her CR-V’s Brake Light
The only means to revolve the brake light turn off is come restore suitable line press to both brake circuits when the pedal is pushed. If her CR-V is having actually trouble stopping, or remarkable leaking fluid, don’t drive it. Just have it towed to a mechanic. If you chaos up addressing your engine, the automobile does no move. If you chaos up resolving the brakes, the doesn’t stop. That’s infinitely an ext dangerous.
See more: A Crocodile Can A Crocodile Stick Out Its Tongue Out Unisex T
If your Honda CR-V’s brake warning light is on, and you’ve checked the emergency brake, you’ll have to look because that a leak in the lines, calipers, wheel cylinders, understand cylinder, etc. Great luck diagnosing the issue. If over there is anything the you would prefer to add, please leaving a comment below.