A1 Engine RepairA2 Automatic TransmissionA3 Manual TransmissionA4 Steering SuspensionA5 BrakesA6 ElectricalA7 Heating Air ConditioningA8 Engine PerformanceG1 Maintenance Lt. Repair


You are watching: 2002 buick lesabre heater control valve location

Heater Control Valve
*

The heater core uses engine coolant to provide heat to the passenger compartment. A heater control valve controls the amount of coolant flowing through the heater core. It is not used in all heater systems, as some manufacturers allow coolant to flow through the heater core any time the engine is running. This type of system uses a blend door to mix cooled and heated air to achieve the desired temperature.The heater control valve allows the flow of coolant through the heater core to be controlled and switched on and off without affecting the operation of the rest of the cooling system. It may be located on the inlet or the outlet port of the heater core and activated by a cable, electronic control, or a vacuum signal. This valve may be normally open, allowing coolant to flow until activated, or normally closed, allowing coolant to flow only when activated.A cable-operated heater control valve uses a Bowden cable to drive a flap located inside the valve. As the occupant manually moves a lever in the control panel, the cable moves a flap in the valve.The vacuum valve does the same thing with a pintle and diaphragm, except this type of valve is normally open. This is in case of malfunction; heat may still be provided to the occupants by the heating system. The engine supplies vacuum through a switch in the dash.Electronic controls can be (PWM) pulse width modulated or controlled by a simple on/off solenoid. Pulse width modulation offers more control than manual controls. The control valve may also be either opened or closed by a signal from the BCM.

Initial Inspection

If the heater control valve is stuck closed, the valve"s inlet and outlet will remain at different temperatures. If the heater core is clogged, the inlet and outlet will be different temperatures. A leaking heater core will leak onto the floorboard and result in a sweet, humid smell (coolant) coming from the vents while in operation.

Ezoicreport this ad


See more: Does The In Styler Really Work ? I Tried It Tuesday: The Instyler

Ezoicreport this ad