The oil sending out unit top top the 2000 Ford F-150 relays the oil press from the engine come the oil push gauge top top the dash. The oil sending unit is one of the many important components on the engine. The oil is pumped increase from the oil pan through the oil pump and through the engine. If the oil is circulating with the engine, the oil passes v the oil sending unit. The oil sending out unit climate tells the oil gauge the exact oil pressure. As soon as the oil sending out unit stop working, girlfriend will have to replace the as soon as possible.

You are watching: 2003 ford f150 oil pressure sensor location


Jack the former of the truck up and place jack stands under the front axle. Make certain that the jack stands room evenly and also securely under the prior axle. Lower the van onto the axle.


Remove the driver"s next front tire. Rotate the lug nuts counterclockwise to loosen and remove the lug nuts. Pull the tires off and set it to the side.


Locate the oil sending unit top top the driver"s side of the engine. The oil sending out unit top top the 2000 Ford F150 is situated underneath the oil filter. The oil sending out unit will be screwed into the oil filter housing. Eliminate the wiring insert indigenous the bottom of the oil sending out unit. Press in on the plastic wire connector and also pull the wiring connector out of the bottom the the oil sending out unit. Placed an open end wrench approximately the head of the oil sending out unit near the threads and also loosen the unit by transforming it counterclockwise. Once the oil sending unit is loose, you can remove that by unscrewing it through your fingers. Location a tiny catch pan under the oil sending out unit to retrieve any excess oil.


Wrap Teflon tape approximately the object of the oil sending out unit. Be certain to pave the Teflon ice cream counterclockwise around the threads or the tape will certainly come off as soon as you screw the oil sending out unit back into the filter housing.


Screw the oil sending out unit back into the oil filter housing. Turn the sending out unit clockwise to tighten. Execute not overtighten the sending out unit or it could break off. Plug the wiring connector ago into the bottom that the oil sending unit.


Crank the engine to make certain that the oil sending unit is working properly and that there space no leaks. Then turn the engine off.

See more: 3 Out Of 14 Is What Percent Of 14 Is 3 Out Of 14 Written As A Percent Value?


Jack Jack stand Lug wrench Open finish wrenches small catch pan Teflon tape replacement oil sending unit
Make certain that the engine has cooled off prior to removing the oil sending unit. The oil sending out unit have the right to get very hot and also burn your hands.

Grace Mclain has actually been writing professionally because 1998. Her posts have appeared on eHow.com, Answerbag.com and also LIVESTRONG.COM, and she specialization in automotive and business topics. McIain has a professional writing certificate native JB hunting in little Rock, Ark.