Hello, This auto has what they call a lifetime fuel filter even though occasionally they have the right to plug up. The fuel filter is located in the fuel tank. I beg your pardon will have to be eliminate to get the filter out. Some cars have actually a catch door because that the fuel pump and filter and also it looks like you vehicle is one of them but if not right here is a overview that will offer you one idea that what you room in for once doing the job. Https://www.tasiilaq.net/articles/how-to-replace-an-electric-fuel-pumpHere room some diagrams to help you watch what i am talking about and how to carry out the job on her car. (below) you re welcome let us understand if you require anything else to acquire the problem fixed.


You are watching: 2011 honda crv fuel filter location

*

*

*

*

*

Engine mechanically problem2001 Honda CRV 4 cyl four Wheel journey Automatic 113000 mile i would choose to understand where is the fuel filter situated
Engine performance problem2002 Honda CRV 4 cyl 4 Wheel drive Automatic 115000 mile I need to recognize where the fuel filter is located.Thank friend
Service and also Repair notes The fuel filter should be changed whenever the fuel push drops below the specified value (270 - 320 kPa, 2.8 - 3.3 kgf/sq.cm, 40 - 47 psi) , ~ making certain that the fuel pump and also the fuel push regulator are OK.Remove the fuel pump.

*

eliminate the fuel filter (A). Install in the turning back order that removal through a brand-new base gasket (B) and also a new O-ring (C), then examine these items:When connecting the cable harness, make certain the connection is secure and the terminal (D) is steady locked right into place. When installing the fuel gauge sending unit (E), make sure the link is secure and also the connector is steady locked right into place. Be mindful not to bend or twist it excessively.
my 2002 Honda CRV 4wd turn off down when I involved a stop. The no longer idles. I can easily start that again and also as long as I keep the RPMs up, the car functions fine. Is this a fuel pump issue?
Clean the end the idle air regulate valve, check the accelerator position and manifold absolute press sensors-to encompass a fuel press check-
Engine mechanical problem2001 Honda CRV 6 cyl all Wheel drive Automatic Hey exactly how long does it take it to do this, you have to drop the tank ns assume right?


See more: Driving Distance From San Antonio To Mexico City From San Antonio

Fuel Pump/Fuel Gauge sending out Unit Replacement special Tools forced Fuel sender wrench 07XAA-001010A1.Relieve the fuel pressure. 2.Remove the fuel fill cap. 3.Fold the rear seats forward, and also pull ago the carpet to disclose the accessibility panel.

*

4.Remove the accessibility panel (A) from the floor. 5.Disconnect the fuel pump 5P connector (B). 6.Disconnect the quick-connect installation (C) indigenous the fuel tank unit.

*

7.Using the unique tool, ease the fuel tank unit assembly locknut (A).

*

8.Remove the locknut (A) and also the fuel tank unit. 9.Remove the fuel filter (B), the fuel gauge sending unit (C), the instance (D), the wire harness (E), and the fuel push regulator (F). 10.When connecting the fuel tank unit, make sure the connection is secure and the suction filter (G) is firmly linked to the fuel pump (H). 11.Install the fuel tank unit in the reverse order that removal v a brand-new base gasket (I) and new O-rings (J). Be sure to inspect these items: *When connecting the wire harness, make sure the connection is secure and the connector (K) is firmly locked into place. *When installing the fuel gauge sending out unit, make certain the link is secure and also the connector is firmly locked into place. Be mindful not to bend or twist it excessively. *When installing the fuel tank unit, align the marks (L) ~ above the fuel tank (M) and the fuel tank unit (N).https://www.tasiilaq.net/kpages/auto_repair_manuals_alldata.htm