Beside above, how do you convert inches of rain to gallons? Multiply the previous result by one inch of rainfall. The result is that one inch of rain yields 4,014,489,600 cubic inches of water per square mile. Divide the result by 231 cubic inches per gallon, and obtain the result of 17,378,743 gallons per square mile for an inch of rainfall.

Then, how many gallons is an inch of water?

1 cubic inch of water (in3 - cu in) = 0.0043 US gallons of water (gal)

What is an inch of rain?

An inch of rain is exactly that, water that is one inch deep. One inch of rainfall equals 4.7 gallons of water per square yard or 22,650 gallons of water per acre!

You are watching: How many gallons of water is one inch of rain per square foot

39 Related Question Answers Found

How far does rain soak into the ground?

An inch of rain will wet the soil to a depth of 1 foot, if there is no runoff and the soil is a sandy loam. If your soil trends to more sand it will penetrate further, and it will be more easily absorbed, but it won"t be retained as long.

How much does 1 inch of rain raise a lake?

For example, if you imagine a lake with perfectly vertical sides (like a pool), a uniform rainfall of one inch across the lake surface (with no runoff from elsewhere) would raise the lake surface one inch (discounting any evaporation, drawdown or downstream outflow).

How many inches is a 5 gallon bucket of water?

Re: Marking a 5 gallon bucket I found it at one time but basically every 6 inches, in a 5 gallon bucket, is 2 gallons of water.

How many raindrops are in a gallon?

90,921 drops

How many gallons is 2 inches of water?

I read somewhere, 2 inches = 2 gallon. Another article says 4-5 gallons per week in hot weather.

What does it mean 1 inch of rain?

An inch of rain means that if you would catch the rain on a flat surface, it would reach up to an inch in height. To properly measure this, you need to make sure that the water can"t flow away or dissipate into the ground, so you"d need a waterproof box with an open top for the rain to fall in.

How do you convert rainfall to volume?

Find the average volume of rain = Depth x radius x radius x 3.14. Find the area at the top of the bucket (this is the area over which the rain is collected). Divide the rainfall volume by this area to get the rainfall.

How long does it take to water 1 inch?

about 30 minutes

How much inches is a cup of water?

1 US cup of water (cup) = 14.44 cubic inches of water (in3 - cu in)

How many ounces are in an inch of water?

0.58 ounces

How many gallons is a 36x18x18 tank?

Standard US Tank Capacities and Stocking Levels Dimensions (LxWxH) Volume in US gallons/type Volume in Liters 48x13x16" (120x33x40cm) 40 long 151 36x12x24" (90x30x60cm) 45 170 36x18x18" (90x45x45cm) 50 189 48x13x20" (120x33x50cm) 55 208

How many tablespoons is an inch of water?

conversion result for two volume or capacity units: From unit Symbol Equals Result To unit Symbol 1 one-inch sphere ∅ 1 in = 0.58 tablespoons US tbsp , tbs

How many gallons of water does it take to water a lawn?

To provide your lawn with one inch of water takes a little over half a gallon per square foot (0.623 gallon to be more exact). That means that every 10"x10" area will require over 62 gallons of water.
Similar Asks

See more: 2003 Honda Civic Transmission Fluid Capacity, Honda Civic Transmission Fluid Capacity

Trending Questions