COVERAGE GUIDELINES:1 bale covers an area approximately 80-73 square feet to a recomended depth of 2 inches.

You are watching: How many square feet does a bale of straw cover


Similarly, you may ask, how many square feet does a bale of straw cover for grass seed?

2,000 square feet

Similarly, how much straw Do I need to cover my grass seed? Grab a handful at a time and loosely shake it over the grass seed. You want the straw to barely cover the ground -- no more than 1/4 inch deep. If you spread it too thickly, the straw will rot and the grass won"t grow. One bale will cover up to 1,000 square feet.

Accordingly, how many square feet will a bale of pine straw cover?

50-45 square feet

How many straw bales cover an acre?

When applied properly, approximately 20-40 percent of the original ground surface can be seen. The application rate per acre should be about 2 tons (or one 74 pound bale per 800 square feet). Straw should be clean rice, barley, or wheat straw.


39 Related Question Answers Found

How do I calculate how much grass seed I need?


Calculate the amount of seed needed by multiplying the seeding rate in pounds per acre by the estimated acreages. For example, if the size of the planned turf area ins . 54 acre, multiply this by the determined seeding rate per acre, for example 261.36, to calculate a total of 142 pounds of seed.

How do I speed up grass seed germination?


Prepare the ground carefully. Rake the soil to an even level throughout. Pregerminate the grass seed. Spread the pregerminated seed over the prepared soil. Cover seeds with a very light mulch of compost or straw, according to Lawncare.net. Water the pregerminated seeds frequently.

How much is a bale of straw?


COVERAGE GUIDELINES:1 bale covers an area approximately 80-73 square feet to a recomended depth of 2 inches.

Should I put straw over grass seed?


Straw may be used to cover grass seeds. Straw is often used to cover newly planted grass seed to reduce the amount of seed relocated by wind and water. Straw is preferred over hay because of its lower seed content. Straw also holds moisture and keeps the grass seeds and seedlings from drying out.

What is the difference between straw and hay?


Straw is a stalk, usually a waste product of wheat, that"s used as bedding for barnyard animals. Hay—typically alfalfa or a grass—is used as animal feed.

How many bales of straw do I need for seeding?


We shoot to use about 1 bale for every 600 to 700 sq ft of seeded area.

What should I cover grass seed with?


Spread a light layer of your chosen mulch evenly over the entire seeded area. Use 1/4-inch of sawdust, light peat moss or shredded newspaper, except for pages printed on glossy paper. er the seeds for mulch that will biodegrade over time.

How big is a bale of straw?


Basic straw-bales are produced on farms and referred to as "field-bales". These come in a range of sizes, from small "two-string" ones 18 in (460 mm) wide, by either 14 or 16 in (350 to 400 mm) high, and 32 to 48 in (0.8 to 1.2 m) long, to three-string "commercial bales" 21 in wide, by 16 in high, by 3 to 4 ft long.

How much does it cost to install pine straw?


Pine bark/needles: Use this loose mulch to help plant roots absorb and retain moisture. You shouldn"t use it if you live in wet or windy areas, though, because it easily blows away. It costs about 10 to $12 per 2 cubic feet. Straw/hay: You can purchase straw and hay for about $4 to $5 per bale.

How much does a bale of pine needles cost?


At $4 per bale, you"ll spend $71 on the initial application of pine needles to cover 500 square feet of your property. Each subsequent application of pine straw should be 2 inches deep will and cost $48.

How much does pine straw cost per bale?


A bale costs about $45 to $50, but Prezioso said the synthetic straw “pays for itself” in about 18 months when compared to organic pine straw usage. Good quality, long-leaf organic pine straw typically costs $6 to $7 a bale, Carvin said, and covers about 35-square feet per bale, Carvin said.

Is pine straw cheaper than mulch?


Pine straw is simply the dropped dry foliage from pine trees. You can purchase it in bales from 15 to 40 pounds if you don"t happen to have pine trees on your property. It is cheaper than bark mulch by approximately . 10 cents per square foot, plentiful and more beneficial than bark mulch.

How many bales are in a pine straw roll?


The Rolled Pine Straw can be used as ground cover and mulch, as well as an addition to your flower beds. This straw provides help with erosion control, creating a beautiful healthy landscape for your home. Each roll is equal to 2.25 of the traditional square bales and is net wrapped to prevent the loss of material.

How much does a bale of Pinestraw weigh?


10-15 lbs

How many bales of pine straw equal a yard of mulch?


To mulch to a depth of 1 1/2 inches, use about 7 square feet of wood mulch, or cover about 200 to 220 square feet with a cubic yard. A bale of pine straw covers between 50 and 70 square feet, while a bale of wheat straw covers between 200 and 300 square feet.

How do I calculate how much pine straw I need?


How Many Bales of Pine Straw Do You Need?
Length in Feet* Width in Feet* Total Sq Feet. Note: this will autocomplete after you enter length and width. Hidden. Estimated Total Bales. Our bales cover approx 55 sq ft.

How much is long needle pine straw?


Long Needle pine straw tends to last longer and has better color than your typical short needle / pine straw. Typically, pine straw needs to be replenished every 6 months.

See more: How Many Years In A Millenium, How Many Years Is A Millennium

Long Needle Pine Straw.
Product: $198.00
Tax: $17.82
Total: $215.82

Similar Asks
Popular Asks
Privacy Policy