I experienced this post on Cha Chathat claimed it was around nine millimeters, yet that CAN"T it is in right!

 

How thick is a paper of press paper?

Edited august 5, 2010 by dstebbins


Standard printer paper is roughly .1mm thick. For file with a basis load of 20 lbs, i m sorry is what I use in my printer, has actually a thickness that .097 mm. So girlfriend are ideal the Cha Cha answer does appear to be way off the mark.

You are watching: How thick is 1000 sheets of paper

 

For fun, ns did a fast check. Ns measured a ream that unopened document to have actually a height of about 4.6 cm. The ream has 500 sheets of file with a record wrapping ~ above the top and the bottom. Lets assume the document wrapping in the exact same thickness as the actual press paper. This would median the ream has actually 502 sheets of record in it. At a height of 4.6 centimeter or 46 mm, this would average each item of record has a height of .0916 mm. I m sorry for seems close enough to the wikipedia value for me to expropriate them both.

Edited august 5, 2010 by DJBruce

*

Right Slider. The post says the thickness of paper is about 9 mil, not 9 millimeters. Nine mil is correct.


*

What you perform is you obtain a ream that paper, take note how plenty of sheets are in the ream and also then measure the thickness and also divide by the number of sheets.


Love that SLIDER7W. Its been over 44 years since I studied any kind of physics or math and I had actually forgotten that 1 mil is no 1 mm. Thanks for that wonderful reminder. The is quite helpful when dealing on-line where many folks usage the terms interchangeably. Yet then a most those folks perform not recognize the difference in between to and too or then and also than and gobs of various other stuff, allow alone mathematics or physics things.

As you claimed 1 mil is 0.001" if 1 mm is 0.039370" or almost 40 times better (thicker, in this case). Ideal regards, Murf (age 78)


Another way to calculate it, is to begin from the density, which because that standard document is about 1200 kg/m3.

 

Printer record is typically about 80 g/m2.

 

0.08/1200 = 0.00007 m or 0.07 mm


This does not assist any more than the above post, just basic interest. Girlfriend could likewise start from straightforward principles and also work out the dimensions: a sheet of area 1 square metre is A0, fifty percent that is A1, half again is A2 and also so on. The ratio of political parties is such that the form does not readjust when cut in half to acquire 2x A1 indigenous an A0. You might then occupational out the size of an A4 piece of record (involving the 4th root the 2) therefore the thickness at 80 g/m2. Every this is extremely beneficial if ever before you need an extremely tiny but precise weight. This has absolutely nothing to perform with a little pair of scales and cannabis.

 

Edit: I"ve simply noticed the subject necromancy

Edited April 20, 2017 through DrKrettin

This does not help any an ext than the above post, just basic interest. Girlfriend could likewise start from an easy principles and work out the dimensions: a paper of area 1 square metre is A0, fifty percent that is A1, fifty percent again is A2 and so on. The ratio of political parties is such the the shape does not adjust when cutting in half to acquire 2x A1 native an A0. You can then work out the size of an A4 item of document (involving the fourth root of 2) hence the thickness in ~ 80 g/m2. Every this is extremely beneficial if ever you need an extremely little but specific weight. This has absolutely naught to do with a little pair of scales and cannabis.

 

Edit: I"ve just noticed the subject necromancy


Even so, a forum favor this is a resource of knowledge and whether the conversation is present doesn"t really matter. Any enhancement of information, like you"ve simply done, will be beneficial for someone looking into the subject. I"m sure you have actually knowingly review long-finished conversations make the efforts to find information.


This walk not aid any more than the above post, just general interest. Friend could also start from simple principles and work the end the dimensions: a sheet of area 1 square metre is A0, fifty percent that is A1, fifty percent again is A2 and so on. The proportion of sides is such that the form does not adjust when cutting in half to get 2x A1 indigenous an A0. You can then work out the dimensions of one A4 item of paper (involving the 4th root that 2) for this reason the thickness in ~ 80 g/m2. All this is extremely advantageous if ever before you need an extremely small but accurate weight. This has absolutely nothing to do with a small pair the scales and cannabis.

 

Edit: I"ve simply noticed the object necromancy


Interesting idea.

 

For the record: this is absolute accuracy. The relative accuracy won"t be the great.

Edited April 20, 2017 by Bender

After having operated in the auto fix industry due to the fact that 1975, I have never heard a "thou" called a "mil". Common engine contents like spark plug gaps earlier in 1975 were talked as 35 thou, 60 thou, however written as 0.035 or 0.060. I have been lucky and managed to live in Canada and also have avoided the metric mechanism like the plague. BTW, to it is in on topic, why not simply use Vernier caliper. Mine claims 3 she or 0.08 mm because that a solitary sheet of 20lb bond, the has been in an wait conditioned environment almost its entirety life.


As long as you space at exactly the correct humidity.

See more: How Many Cups Of Rice For 10 People ? How Much Rice Per Person Is Required

Otherwise it gives you a small but approximate weight (well... Mass)


Important Information

We have placed cookies on your maker to help make this website better. Girlfriend can adjust your cookie settings, otherwise we"ll i think you"re okay to continue.