Pot racks can gain very heavy when weighed down with a full set of pots & pans, so that is essential that yours is installed firmly into the joists to stop the rack indigenous falling!You will certainly need:· ceiling screws, that is a timber screw because that the joist through a hook in ~ one end to connect to the chain. For a hefty or invited rack, you can need a more powerful anchor, prefer a long molly bolt.· a drill· a stud finder (optional)How to find joists* The simplest means to uncover joists is come look because that nails or nail heads that organize the wallboard come the joists. Depending on construction, most joists are spaced at 16” or 24” gaps. A flashlight may aid to locate these. Tap the area to discover a section with solid backing – the joist* Failing that, invest in a stud finder indigenous your neighborhood hardware store. A an easy stud finder deserve to cost around $10. Just slide it throughout the ceiling and it will certainly beep or flash together it detects the solid frame. Note the place of the joists and their directionWhere perform you drill?If her rack has 2 ceiling points* Racks room sturdiest when hung with the chain at an angle, either outwards or inwards, as presented in the 2 images below. This adds more stability and prevents the rack from swinging or tilting,

*

In this picture, the 2 chains on each finish meet therefore the rack will hang from simply 2 point out in the ceiling.* The simplest way is to hang the rack in the very same direction together the joists, so you deserve to simply measure suggest to point throughout the joist, drill, solve in the screws and hang the rack.* If you choose to cave the rack at ideal angles to the joists, uncover 2 joists and also measure the street across. Make sure that the distance between them will allow you come still hang her chains in ~ angles, together in the photographs. Depending upon the size of your rack, you could need to walk to the next joist.If your rack has actually 4 ceiling points

*

In this photo, the customer desired to usage 4 hanging points. This is recommended if you have a hefty pot rack and/or a lot of hefty pots and also pans. This spreads the weight of the rack out throughout 4 points, putting less pressure on every ceiling hook.

In together a case, friend will need to find 2 joists.

The rack over was 30” wide, the joists 16” apart. Angling the rods contempt outwards, they can reach 2 joists.

Note that the 4 point hanging is our desired method.


You are watching: How to hang a pot rack from ceiling without studs


See more: How Many Inches In 9 Cm To Inches, Conversion 9 Cm Into Inches

We perform not offer ceiling hooks since we recommend acquiring a kind that will specifically occupational for her ceiling type.