A tattoo an equipment will run either method you attach your clip cord to it, however you should take care to affix it the right way, since of the capacitor that’s set up in the device electrical circuit. Axial capacitors space the many used in tattoo machines, and also they are polarized. They have positive and an unfavorable lead ends, and if you invert voltage, it will cause a disfunction the may ruin the facility layer the dielectric material and also cause a short circuit, even heating up and bursting.

You are watching: How to make a clip cord for tattoo machine

To avoid this type of problem, learn just how to connect your clip cord correctly: it’s common between most tattoo maker builders to location the capacitor through the positive finish pointing downwards, connected to the rear binding post, and also the an adverse end pointing upwards, and also connected to the former binding post. This method that you have to connect the hopeful hook of the clipcord (usually significant in red) to the behind binding article of the an equipment (bottom), and also the an unfavorable (marked in black) to the feet underside of the spring deck component (top), as the following snapshot shows:

*

ALL my MACHINES are collection this way, so remember, black color on top, red on bottom, always. In part cases, when I ar the binding write-ups horizontally, the positive one is the left post, and also the right article is the negative. Constantly connect your clipcord correctly, and your machine will execute better, considerably extending the capacitor life.

Now, few of you will certainly say… “but my clip cord hasn’t got any type of red / black color distinctions”. Yes, some manufacturers don’t put any mark ~ above them. To find which are the optimistic and an adverse ones, you have the right to unscrew the covering on the jack connector(the cord component that girlfriend plug into the power supply), and check the 2 pins to which the two cables that compose the clip cord space soldered. The one in the facility is the positive, for this reason follow the cable and you’ll discover the positive finish on the other side of the clipcord (I’d suggest to note it so friend don’t have actually to inspect again).

See more: What Does Up And Down Mean In Basketball? Up And Down

The an unfavorable pin is the longer one, or the “sleeve”; inspect this diagram for far better understanding:

*

To end this tutorial, if you very own other equipments (not constructed by me) and you want to examine if the capacitor is associated to the an equipment circuit in “the exactly way”, take a look at it: capacitors usually present a groove on the optimistic end, and also it should allude downwards. Also, an arrow is usually published on the capacitor, pointing the negative side, upwards.If you find that the capacitor is turning back (groove, hopeful on top, an unfavorable on the bottom), friend just have actually to affix the clip cord inversely, as well (red top top top, black on bottom).