If you’re wondering even if it is or not you can use oil-based paint over latex, it yes, really isn’t a smart decision, but that is possible. The reason experts advise against doing this is because latex repaint is versatile in nature, and also as a result, oil-based paints won’t appropriately adhere to them.

You are watching: How to paint oil over latex


If that is no done properly, it provides a normal repaint job take lot longer.

However, if girlfriend sand the surface and also apply a sealing coat such as primer in between the various layers, friend can acquire by applying oil-based repaint over latex. Preparation is key. to successfully apply oil-based repaint over latex, follow the measures below:

Step 1: Sand the surface

As formerly mentioned, latex is flexible in nature. As a result, oil-based repaint won’t properly adhere to latex unless you sand the surface and add primer between each the the layers. Start by equipping yourself through a item of P80 grit sandpaper and shot to eliminate as lot of the latex from the surface.

You can likewise use a sanding block. By removing the latex indigenous the surface, the oil-based paint will adhere much better than if the latex was left on. Make sure you sand the surface ar down until you gain a actual matte look.

Step 2: Sand a little more

You’ll currently want usage 150 grit sandpaper and also sand until you gain a surface ar that’s very smooth. After the surface has been totally sanded, wipe away the dust left behind through a wet towel or a clean cloth and let the surface to totally dry.

Step 3: Mask the area

Using a high quality masking tape, you’ll want to mask anything you don’t want accidentally painted. This can encompass things favor the edge of adjoining walls, the edges of her cabinets, the edges of a irradiate switch, and also so on. Masking helps you get that yes, really clean, spicy look as soon as you’re finished painting and also everything is fully dried.

Step 4: use your primer

You have actually the choice between a water-based or acrylic primer. Each of this primers job-related well and have your pros and cons. Both water-based and acrylic primers produce the perfect isolating surface. After friend have applied the primer, and it’s totally dried, you’ll want to go ahead and apply a second coat. It’s crucial to make certain you spanned every solitary piece that latex possible.

Step 5: use top coat

You’ll need a container that oil-based peak coat. This can be to buy at many home advancement stores. After girlfriend have applied this solution, offer it enough time come dry, and also if need be, apply one more coat for superior coverage.

Step 6: remove all the masking tape

It’s best to remove all the masking tape before the paint totally dries. Removing the masking ~ the repaint has totally dried can cause the paint to tear, break, or chip.

Can you paint latex end oil-based paint?

Now that you know how use oil-based repaint to latex, the inquiry remains. Have the right to you paint latex end oil-based paint? The price is yes, yet the point you haver to remember is, when you apply latex end an oil-based paint, the only method to eliminate it is come sand that off. The can end up being quite a nightmare, for this reason make certain you obtain it ideal the very first time.

If you perform decide to usage latex over an oil-based paint, you’ll also want come make sure you sand out any glossy areas of the surface, and also make certain you use 100% acrylic latex. It’s also important to keep in mind that the an ext you sand the surfaces, the much better the acrylic repaint will stick come them. To efficiently paint latex end oil-based paint:

Step 1: Sand the surface

To ensure the surface is fully sanded, and also make sure you don’t see any kind of sort the shine. You’ll want to see much more of a matte surface. This sanding should be done through a 150 grit paper.

Step 2: Mask the neighboring area

To make sure you obtain sharp, clean-cut edges, mask the bordering area through a high quality masking tape. Remove the masking tape as soon as you’re excellent painting and also the paint is still moist. Like pointed out above, remove the masking tape as soon as the paint has fully dried deserve to chip, rip, or break the repaint off.

Step 3: use latex ‘conversion’ primer paint

Once the surface has actually been fully sanded, you’ll want to apply a layer of latex ‘conversion’ primer paint. Make certain you offer it enough time to dry and you cover all areas of the surface you’re painting.

See more: How Many Carbs Does Jack Daniels Have Carbs? Carb Manager

Step 4: apply your oil-based paint

Lastly, use your oil-based paint and also let that dry. As soon as the latex ‘conversion’ primer and your oil-based paint mix, they allow your oil-based paint to adhere with no issues.