Pro scooter pegs are a really popular enhancement to pro scooters that plenty of riders enjoy. They have become popular since the open up up new tricks and combos. Lock are specifically popular for particular grind tricks. Installation pegs is a very easy and quick change that anyone is able to do.

You are watching: How to put pegs on a scooter

Below us will breakdown the process on just how to install them ~ above the rear axle of among our pro scooter decks (many decks usage the very same size rear axle peg bolts) and what devices you will need. The new decks are provided on ourcomplete agree scooters

To begin off girlfriend will need pegs and the peg axle. The motion deck will need a 3" inch behind peg axle, pictured below. Girlfriend will also need a set of allen secrets (or hex key) to remove the installed Pro Scooter axle. Girlfriend will likewise need a 6mm allen wrench and 1/2" socket wrench because that the peg axle seed (not pictured).

*

Once girlfriend have all of your tools together have the scooter organized secure and also use the allen wrenches to eliminate the existing axle. Once you remove the axle make sure to watch the end for the spacers and not lose them. Castle are small and can obtain away native you. As soon as you have actually the axle loosened use among the allen wrenches to press the remainder of the axle out. You will certainly be left v the spacers, the wheel and the axle.

*
*
*
*

Now that you have actually the wheel, axle and spacers apart it"s time to acquire started ~ above the installation. Prepare girlfriend peg by to run the peg axle with it. When you execute that decice what next you would like the peg to go. I made decision to put it on the appropriate side of the deck.

*

This is where it it s okay interesting! If you shot to hold the wheel and also 2 spacers in place by hand you will spend all job arguing and also calling the spacers names, they just do not want to stay still, really annoying!!

What you to make her life easier is happen the peg axle bolt a tiny bit in ~ a time v the opening and also use that to hold the spacer in place. Then happen it v a small bit an ext and hold the wheel in place, then ultimately a little an ext to organize the final spacer in place and pass it with the last opening on the deck!

*
*
*

Now the you have the peg axle with all you have actually left to execute is to start tightening the 1/2" nut. Start tightening by hand to hold it in place and also once the on usage your socket wrench come tighten that up all the way.

Here we have the rear peg and also axle installed! See very easy.

See more: How To Remove Jeep Shifter Knob S From Jeep Jk Wrangler With Manual Transmission

*
*

I expect this little tutorial helps. If girlfriend think we should have other tutorials please comment below.