Installation, Repair and Replacement of john Deere Sabre 14.5/38 Hydro Tractor journey Belt GX10851
Left-hand and also right-hand room referenced from the point of view of the tractor operator.The level backside the the belt rides on flat idlers; the inside vee rides in v-idlers and pulleys. This john Deere Sabre offers drive belt part number GX10851 i beg your pardon is 98.87" lengthy x 1/2" wide, HA section, 0.31 thick, 32 deg., KEVLAR construction.
You are watching: John deere sabre drive belt size
Models: SABRE 1438GS, 1438HS, 15.538GS, 15.538HS, 1542GS, 1542HS, 15.542GS, 15.542HS, 1642HS, 1642V-Twin H, 1642V-Twin G, 1646HS, 1646V-Twin H, 1742GS, 1742HS; EUROPRO 1438GS, 1538HS, 1542GS, 1642H, 1646H; Scotts S1642, S2546 one-of-a-kind Edition; SABO 97-14HS, 107-17HS
Overall check out of the belt layout (#1). The engine sheave is at the ideal of the photo. The transmission is at the left.
The parking brake latch eyebolt (#2, white) need to be eliminated to replace the journey belt. Bring the front loop of the belt forward end the parking brake latch rod and also reinstall the eyebolt.
Disconnect the drag connect from the steering arm (#3, red). Carry the former loop roughly the steering shaft and also reconnect the drag link.
Remove the belt overview from about the engine pulley. Put the belt top top the top engine pulley. Be certain the belt is in ~ the guide presented at #4, red. Reinstall the guide. Disconnect the forward hook that the large idler tensioning spring from the framework bracket (#4, blue).
Run the back end the the belt roughly the transmission pulley and rear v-idler (#5).
Finally, path the belt roughly the tensioning idlers (#6). Reconnect the tensioning spring. Keep in mind the place of the spring"s rearward hook (#6, white).
See more: Kevin And Max Freak The Mighty ? Kevin In Freak The Mighty
John Deere Sabre 14.5/38 Hydro journey diagram (#7).